AWS SES (version v3.*.*)

$body#

Represents a request to create a receipt rule set by cloning an existing one. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "OriginalRuleSetName" : "The name of the rule set to clone.",
  "RuleSetName" : "The name of the rule set to create. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Start and end with a letter or number.  \n Contain less than 64 characters. "
}

$body#

Represents a request to create a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Type: object

{
  "ConfigurationSet" : {
    "Name" : "The name of the configuration set. The name must meet the following requirements:  \n Contain only letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain 64 characters or fewer. "
  }
}

$body#

Represents a request to create a configuration set event destination. A configuration set event destination, which can be either Amazon CloudWatch or Amazon Kinesis Firehose, describes an AWS service in which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide.

Type: object

{
  "ConfigurationSetName" : "The name of the configuration set that the event destination should be associated with.",
  "EventDestination" : {
    "CloudWatchDestination" : {
      "DimensionConfigurations" : [ {
        "CloudWatchDimensionConfiguration" : {
          "DimensionValueSource" : "The place where Amazon SES finds the value of a dimension to publish to Amazon CloudWatch. If you want Amazon SES to use the message tags that you specify using an X-SES-MESSAGE-TAGS header or a parameter to the SendEmail/SendRawEmail API, choose messageTag. If you want Amazon SES to use your own email headers, choose emailHeader.",
          "DefaultDimensionValue" : "The default value of the dimension that is published to Amazon CloudWatch if you do not provide the value of the dimension when you send an email. The default value must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. ",
          "DimensionName" : "The name of an Amazon CloudWatch dimension associated with an email sending metric. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. "
        }
      } ]
    },
    "Enabled" : "Sets whether Amazon SES publishes events to this destination when you send an email with the associated configuration set. Set to true to enable publishing to this destination; set to false to prevent publishing to this destination. The default value is false.",
    "MatchingEventTypes" : [ "string. Possible values: send | reject | bounce | complaint | delivery | open | click | renderingFailure" ],
    "SNSDestination" : {
      "TopicARN" : "The ARN of the Amazon SNS topic that email sending events will be published to. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide."
    },
    "Name" : "The name of the event destination. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 64 characters. ",
    "KinesisFirehoseDestination" : {
      "IAMRoleARN" : "The ARN of the IAM role under which Amazon SES publishes email sending events to the Amazon Kinesis Firehose stream.",
      "DeliveryStreamARN" : "The ARN of the Amazon Kinesis Firehose stream that email sending events should be published to."
    }
  }
}

$body#

Represents a request to create an open and click tracking option object in a configuration set.

Type: object

{
  "TrackingOptions" : {
    "CustomRedirectDomain" : "The custom subdomain that will be used to redirect email recipients to the Amazon SES event tracking domain."
  },
  "ConfigurationSetName" : "The name of the configuration set that the tracking options should be associated with."
}

$body#

Represents a request to create a custom verification email template.

Type: object

{
  "FromEmailAddress" : "The email address that the custom verification email is sent from.",
  "TemplateContent" : "The content of the custom verification email. The total size of the email must be less than 10 MB. The message body may contain HTML, with some limitations. For more information, see Custom Verification Email Frequently Asked Questions in the Amazon SES Developer Guide.",
  "SuccessRedirectionURL" : "The URL that the recipient of the verification email is sent to if his or her address is successfully verified.",
  "TemplateName" : "The name of the custom verification email template.",
  "FailureRedirectionURL" : "The URL that the recipient of the verification email is sent to if his or her address is not successfully verified.",
  "TemplateSubject" : "The subject line of the custom verification email."
}

$body#

Represents a request to create a new IP address filter. You use IP address filters when you receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "Filter" : {
    "IpFilter" : {
      "Policy" : "Indicates whether to block or allow incoming mail from the specified IP addresses.",
      "Cidr" : "A single IP address or a range of IP addresses that you want to block or allow, specified in Classless Inter-Domain Routing (CIDR) notation. An example of a single email address is 10.0.0.1. An example of a range of IP addresses is 10.0.0.1/24. For more information about CIDR notation, see RFC 2317."
    },
    "Name" : "The name of the IP address filter. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Start and end with a letter or number.  \n Contain less than 64 characters. "
  }
}

$body#

Represents a request to create a receipt rule. You use receipt rules to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "After" : "The name of an existing rule after which the new rule will be placed. If this parameter is null, the new rule will be inserted at the beginning of the rule list.",
  "Rule" : {
    "ScanEnabled" : "If true, then messages that this receipt rule applies to are scanned for spam and viruses. The default value is false.",
    "Recipients" : [ "string" ],
    "Actions" : [ {
      "ReceiptAction" : {
        "BounceAction" : {
          "SmtpReplyCode" : "The SMTP reply code, as defined by RFC 5321.",
          "Sender" : "The email address of the sender of the bounced email. This is the address from which the bounce message will be sent.",
          "TopicArn" : "The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the bounce action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.",
          "Message" : "Human-readable text to include in the bounce message.",
          "StatusCode" : "The SMTP enhanced status code, as defined by RFC 3463."
        },
        "S3Action" : {
          "BucketName" : "The name of the Amazon S3 bucket that incoming email will be saved to.",
          "TopicArn" : "The ARN of the Amazon SNS topic to notify when the message is saved to the Amazon S3 bucket. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.",
          "KmsKeyArn" : "The customer master key that Amazon SES should use to encrypt your emails before saving them to the Amazon S3 bucket. You can use the default master key or a custom master key you created in AWS KMS as follows:  \n To use the default master key, provide an ARN in the form of arn:aws:kms:REGION:ACCOUNT-ID-WITHOUT-HYPHENS:alias/aws/ses. For example, if your AWS account ID is 123456789012 and you want to use the default master key in the US West (Oregon) region, the ARN of the default master key would be arn:aws:kms:us-west-2:123456789012:alias/aws/ses. If you use the default master key, you don't need to perform any extra steps to give Amazon SES permission to use the key.  \n To use a custom master key you created in AWS KMS, provide the ARN of the master key and ensure that you add a statement to your key's policy to give Amazon SES permission to use it. For more information about giving permissions, see the Amazon SES Developer Guide.   \nFor more information about key policies, see the AWS KMS Developer Guide. If you do not specify a master key, Amazon SES will not encrypt your emails.  \nYour mail is encrypted by Amazon SES using the Amazon S3 encryption client before the mail is submitted to Amazon S3 for storage. It is not encrypted using Amazon S3 server-side encryption. This means that you must use the Amazon S3 encryption client to decrypt the email after retrieving it from Amazon S3, as the service has no access to use your AWS KMS keys for decryption. This encryption client is currently available with the AWS SDK for Java and AWS SDK for Ruby only. For more information about client-side encryption using AWS KMS master keys, see the Amazon S3 Developer Guide.",
          "ObjectKeyPrefix" : "The key prefix of the Amazon S3 bucket. The key prefix is similar to a directory name that enables you to store similar data under the same directory in a bucket."
        },
        "StopAction" : {
          "Scope" : "The name of the RuleSet that is being stopped.",
          "TopicArn" : "The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the stop action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide."
        },
        "WorkmailAction" : {
          "TopicArn" : "The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the WorkMail action is called. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.",
          "OrganizationArn" : "The ARN of the Amazon WorkMail organization. An example of an Amazon WorkMail organization ARN is arn:aws:workmail:us-west-2:123456789012:organization/m-68755160c4cb4e29a2b2f8fb58f359d7. For information about Amazon WorkMail organizations, see the Amazon WorkMail Administrator Guide."
        },
        "SNSAction" : {
          "TopicArn" : "The Amazon Resource Name (ARN) of the Amazon SNS topic to notify. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.",
          "Encoding" : "The encoding to use for the email within the Amazon SNS notification. UTF-8 is easier to use, but may not preserve all special characters when a message was encoded with a different encoding format. Base64 preserves all special characters. The default value is UTF-8."
        },
        "AddHeaderAction" : {
          "HeaderValue" : "Must be less than 2048 characters, and must not contain newline characters (\"\\r\" or \"\\n\").",
          "HeaderName" : "The name of the header to add. Must be between 1 and 50 characters, inclusive, and consist of alphanumeric (a-z, A-Z, 0-9) characters and dashes only."
        },
        "LambdaAction" : {
          "FunctionArn" : "The Amazon Resource Name (ARN) of the AWS Lambda function. An example of an AWS Lambda function ARN is arn:aws:lambda:us-west-2:account-id:function:MyFunction. For more information about AWS Lambda, see the AWS Lambda Developer Guide.",
          "TopicArn" : "The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the Lambda action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.",
          "InvocationType" : "The invocation type of the AWS Lambda function. An invocation type of RequestResponse means that the execution of the function will immediately result in a response, and a value of Event means that the function will be invoked asynchronously. The default value is Event. For information about AWS Lambda invocation types, see the AWS Lambda Developer Guide.  \nThere is a 30-second timeout on RequestResponse invocations. You should use Event invocation in most cases. Use RequestResponse only when you want to make a mail flow decision, such as whether to stop the receipt rule or the receipt rule set."
        }
      }
    } ],
    "Enabled" : "If true, the receipt rule is active. The default value is false.",
    "Name" : "The name of the receipt rule. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Start and end with a letter or number.  \n Contain less than 64 characters. ",
    "TlsPolicy" : "Specifies whether Amazon SES should require that incoming email is delivered over a connection encrypted with Transport Layer Security (TLS). If this parameter is set to Require, Amazon SES will bounce emails that are not received over TLS. The default is Optional."
  },
  "RuleSetName" : "The name of the rule set that the receipt rule will be added to."
}

$body#

Represents a request to create an empty receipt rule set. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "RuleSetName" : "The name of the rule set to create. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Start and end with a letter or number.  \n Contain less than 64 characters. "
}

$body#

Represents a request to create an email template. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "Template" : {
    "HtmlPart" : "The HTML body of the email.",
    "TextPart" : "The email body that will be visible to recipients whose email clients do not display HTML.",
    "TemplateName" : "The name of the template. You will refer to this name when you send email using the SendTemplatedEmail or SendBulkTemplatedEmail operations.",
    "SubjectPart" : "The subject line of the email."
  }
}

$body#

Represents a request to delete a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Type: object

{
  "ConfigurationSetName" : "The name of the configuration set to delete."
}

$body#

Represents a request to delete a configuration set event destination. Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Type: object

{
  "EventDestinationName" : "The name of the event destination to delete.",
  "ConfigurationSetName" : "The name of the configuration set from which to delete the event destination."
}

$body#

Represents a request to delete open and click tracking options in a configuration set.

Type: object

{
  "ConfigurationSetName" : "The name of the configuration set from which you want to delete the tracking options."
}

$body#

Represents a request to delete an existing custom verification email template.

Type: object

{
  "TemplateName" : "The name of the custom verification email template that you want to delete."
}

$body#

Represents a request to delete one of your Amazon SES identities (an email address or domain).

Type: object

{
  "Identity" : "The identity to be removed from the list of identities for the AWS Account."
}

$body#

Represents a request to delete a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Type: object

{
  "PolicyName" : "The name of the policy to be deleted.",
  "Identity" : "The identity that is associated with the policy that you want to delete. You can specify the identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. \nTo successfully call this API, you must own the identity."
}

$body#

Represents a request to delete an IP address filter. You use IP address filters when you receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "FilterName" : "The name of the IP address filter to delete."
}

$body#

Represents a request to delete a receipt rule. You use receipt rules to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "RuleSetName" : "The name of the receipt rule set that contains the receipt rule to delete.",
  "RuleName" : "The name of the receipt rule to delete."
}

$body#

Represents a request to delete a receipt rule set and all of the receipt rules it contains. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "RuleSetName" : "The name of the receipt rule set to delete."
}

$body#

Represents a request to delete an email template. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "TemplateName" : "The name of the template to be deleted."
}

$body#

Represents a request to delete an email address from the list of email addresses you have attempted to verify under your AWS account.

Type: object

{
  "EmailAddress" : "An email address to be removed from the list of verified addresses."
}

$body#

Represents a request to return the metadata and receipt rules for the receipt rule set that is currently active. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{ }

$body#

Represents a request to return the details of a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Type: object

{
  "ConfigurationSetAttributeNames" : [ "string. Possible values: eventDestinations | trackingOptions | reputationOptions" ],
  "ConfigurationSetName" : "The name of the configuration set to describe."
}

$body#

Represents a request to return the details of a receipt rule. You use receipt rules to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "RuleSetName" : "The name of the receipt rule set that the receipt rule belongs to.",
  "RuleName" : "The name of the receipt rule."
}

$body#

Represents a request to return the details of a receipt rule set. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "RuleSetName" : "The name of the receipt rule set to describe."
}

$body#

Represents a request to retrieve an existing custom verification email template.

Type: object

{
  "TemplateName" : "The name of the custom verification email template that you want to retrieve."
}

$body#

Represents a request for the status of Amazon SES Easy DKIM signing for an identity. For domain identities, this request also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES successfully verified that these tokens were published. For more information about Easy DKIM, see the Amazon SES Developer Guide.

Type: object

{
  "Identities" : [ "string" ]
}

$body#

Represents a request to return the Amazon SES custom MAIL FROM attributes for a list of identities. For information about using a custom MAIL FROM domain, see the Amazon SES Developer Guide.

Type: object

{
  "Identities" : [ "string" ]
}

$body#

Represents a request to return the notification attributes for a list of identities you verified with Amazon SES. For information about Amazon SES notifications, see the Amazon SES Developer Guide.

Type: object

{
  "Identities" : [ "string" ]
}

$body#

Represents a request to return the requested sending authorization policies for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Type: object

{
  "PolicyNames" : [ "string" ],
  "Identity" : "The identity for which the policies will be retrieved. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. \nTo successfully call this API, you must own the identity."
}

$body#

Represents a request to return the Amazon SES verification status of a list of identities. For domain identities, this request also returns the verification token. For information about verifying identities with Amazon SES, see the Amazon SES Developer Guide.

Type: object

{
  "Identities" : [ "string" ]
}

$body#

Type: object

{
  "TemplateName" : "The name of the template you want to retrieve."
}

$body#

Represents a request to list the configuration sets associated with your AWS account. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Type: object

{
  "NextToken" : "A token returned from a previous call to ListConfigurationSets to indicate the position of the configuration set in the configuration set list.",
  "MaxItems" : "The number of configuration sets to return."
}

$body#

Represents a request to return a list of all identities (email addresses and domains) that you have attempted to verify under your AWS account, regardless of verification status.

Type: object

{
  "IdentityType" : "The type of the identities to list. Possible values are \"EmailAddress\" and \"Domain\". If this parameter is omitted, then all identities will be listed."
}

$body#

Represents a request to return a list of sending authorization policies that are attached to an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Type: object

{
  "Identity" : "The identity that is associated with the policy for which the policies will be listed. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. \nTo successfully call this API, you must own the identity."
}

$body#

Represents a request to list the IP address filters that exist under your AWS account. You use IP address filters when you receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{ }

$body#

Represents a request to list the receipt rule sets that exist under your AWS account. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "NextToken" : "A token returned from a previous call to ListReceiptRuleSets to indicate the position in the receipt rule set list."
}

$body#

Type: object

{
  "NextToken" : "A token returned from a previous call to ListTemplates to indicate the position in the list of email templates.",
  "MaxItems" : "The maximum number of templates to return. This value must be at least 1 and less than or equal to 10. If you do not specify a value, or if you specify a value less than 1 or greater than 10, the operation will return up to 10 results."
}

$body#

Represents a request to add or update a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Type: object

{
  "Policy" : "The text of the policy in JSON format. The policy cannot exceed 4 KB. \nFor information about the syntax of sending authorization policies, see the Amazon SES Developer Guide. ",
  "PolicyName" : "The name of the policy. \nThe policy name cannot exceed 64 characters and can only include alphanumeric characters, dashes, and underscores.",
  "Identity" : "The identity that the policy will apply to. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. \nTo successfully call this API, you must own the identity."
}

$body#

Represents a request to reorder the receipt rules within a receipt rule set. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "RuleNames" : [ "string" ],
  "RuleSetName" : "The name of the receipt rule set to reorder."
}

$body#

Represents a request to send a bounce message to the sender of an email you received through Amazon SES.

Type: object

{
  "BounceSender" : "The address to use in the \"From\" header of the bounce message. This must be an identity that you have verified with Amazon SES.",
  "MessageDsn" : {
    "ArrivalDate" : "When the message was received by the reporting mail transfer agent (MTA), in RFC 822 date-time format.",
    "ExtensionFields" : [ {
      "ExtensionField" : {
        "Value" : "The value of the header to add. Must be less than 2048 characters, and must not contain newline characters (\"\\r\" or \"\\n\").",
        "Name" : "The name of the header to add. Must be between 1 and 50 characters, inclusive, and consist of alphanumeric (a-z, A-Z, 0-9) characters and dashes only."
      }
    } ],
    "ReportingMta" : "The reporting MTA that attempted to deliver the message, formatted as specified in RFC 3464 (mta-name-type; mta-name). The default value is dns; inbound-smtp.[region].amazonaws.com."
  },
  "Explanation" : "Human-readable text for the bounce message to explain the failure. If not specified, the text will be auto-generated based on the bounced recipient information.",
  "BouncedRecipientInfoList" : [ {
    "BouncedRecipientInfo" : {
      "RecipientDsnFields" : {
        "Status" : "The status code that indicates what went wrong. This is required by RFC 3464.",
        "RemoteMta" : "The MTA to which the remote MTA attempted to deliver the message, formatted as specified in RFC 3464 (mta-name-type; mta-name). This parameter typically applies only to propagating synchronous bounces.",
        "Action" : "The action performed by the reporting mail transfer agent (MTA) as a result of its attempt to deliver the message to the recipient address. This is required by RFC 3464.",
        "ExtensionFields" : [ {
          "ExtensionField" : {
            "Value" : "The value of the header to add. Must be less than 2048 characters, and must not contain newline characters (\"\\r\" or \"\\n\").",
            "Name" : "The name of the header to add. Must be between 1 and 50 characters, inclusive, and consist of alphanumeric (a-z, A-Z, 0-9) characters and dashes only."
          }
        } ],
        "LastAttemptDate" : "The time the final delivery attempt was made, in RFC 822 date-time format.",
        "DiagnosticCode" : "An extended explanation of what went wrong; this is usually an SMTP response. See RFC 3463 for the correct formatting of this parameter.",
        "FinalRecipient" : "The email address that the message was ultimately delivered to. This corresponds to the Final-Recipient in the DSN. If not specified, FinalRecipient will be set to the Recipient specified in the BouncedRecipientInfo structure. Either FinalRecipient or the recipient in BouncedRecipientInfo must be a recipient of the original bounced message.  \nDo not prepend the FinalRecipient email address with rfc 822;, as described in RFC 3798."
      },
      "Recipient" : "The email address of the recipient of the bounced email.",
      "BounceType" : "The reason for the bounce. You must provide either this parameter or RecipientDsnFields.",
      "RecipientArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to receive email for the recipient of the bounced email. For more information about sending authorization, see the Amazon SES Developer Guide."
    }
  } ],
  "BounceSenderArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the address in the \"From\" header of the bounce. For more information about sending authorization, see the Amazon SES Developer Guide.",
  "OriginalMessageId" : "The message ID of the message to be bounced."
}

$body#

Represents a request to send a templated email to multiple destinations using Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "TemplateArn" : "The ARN of the template to use when sending this email.",
  "SourceArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter. \nFor example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com. \nFor more information about sending authorization, see the Amazon SES Developer Guide.",
  "DefaultTags" : [ {
    "MessageTag" : {
      "Value" : "The value of the tag. The value must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. ",
      "Name" : "The name of the tag. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. "
    }
  } ],
  "ReturnPath" : "The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient's ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. ",
  "DefaultTemplateData" : "A list of replacement values to apply to the template when replacement data is not specified in a Destination object. These values act as a default or fallback option when no other data is available. \nThe template data is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.",
  "ReplyToAddresses" : [ "string" ],
  "Destinations" : [ {
    "BulkEmailDestination" : {
      "Destination" : {
        "ToAddresses" : [ "string" ],
        "CcAddresses" : [ "string" ],
        "BccAddresses" : [ "string" ]
      },
      "ReplacementTemplateData" : "A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.",
      "ReplacementTags" : [ {
        "MessageTag" : {
          "Value" : "The value of the tag. The value must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. ",
          "Name" : "The name of the tag. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. "
        }
      } ]
    }
  } ],
  "ConfigurationSetName" : "The name of the configuration set to use when you send an email using SendBulkTemplatedEmail.",
  "Source" : "The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. \nIf you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.  \nAmazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.",
  "ReturnPathArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter. \nFor example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com. \nFor more information about sending authorization, see the Amazon SES Developer Guide.",
  "Template" : "The template to use when sending this email."
}

$body#

Represents a request to send a custom verification email to a specified recipient.

Type: object

{
  "TemplateName" : "The name of the custom verification email template to use when sending the verification email.",
  "ConfigurationSetName" : "Name of a configuration set to use when sending the verification email.",
  "EmailAddress" : "The email address to verify."
}

$body#

Represents a request to send a single formatted email using Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "Destination" : {
    "ToAddresses" : [ "string" ],
    "CcAddresses" : [ "string" ],
    "BccAddresses" : [ "string" ]
  },
  "Message" : {
    "Body" : {
      "Html" : {
        "Charset" : "The character set of the content.",
        "Data" : "The textual data of the content."
      },
      "Text" : {
        "Charset" : "The character set of the content.",
        "Data" : "The textual data of the content."
      }
    },
    "Subject" : {
      "Charset" : "The character set of the content.",
      "Data" : "The textual data of the content."
    }
  },
  "SourceArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter. \nFor example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com. \nFor more information about sending authorization, see the Amazon SES Developer Guide.",
  "ReturnPath" : "The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient's ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. ",
  "ReplyToAddresses" : [ "string" ],
  "ConfigurationSetName" : "The name of the configuration set to use when you send an email using SendEmail.",
  "Source" : "The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. \nIf you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.  \nAmazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.",
  "ReturnPathArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter. \nFor example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com. \nFor more information about sending authorization, see the Amazon SES Developer Guide.",
  "Tags" : [ {
    "MessageTag" : {
      "Value" : "The value of the tag. The value must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. ",
      "Name" : "The name of the tag. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. "
    }
  } ]
}

$body#

Represents a request to send a single raw email using Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "SourceArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter. \nFor example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com. \nInstead of using this parameter, you can use the X-header X-SES-SOURCE-ARN in the raw message of the email. If you use both the SourceArn parameter and the corresponding X-header, Amazon SES uses the value of the SourceArn parameter.  \nFor information about when to use this parameter, see the description of SendRawEmail in this guide, or see the Amazon SES Developer Guide.",
  "Destinations" : [ "string" ],
  "FromArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to specify a particular \"From\" address in the header of the raw email. \nInstead of using this parameter, you can use the X-header X-SES-FROM-ARN in the raw message of the email. If you use both the FromArn parameter and the corresponding X-header, Amazon SES uses the value of the FromArn parameter.  \nFor information about when to use this parameter, see the description of SendRawEmail in this guide, or see the Amazon SES Developer Guide.",
  "ConfigurationSetName" : "The name of the configuration set to use when you send an email using SendRawEmail.",
  "RawMessage" : {
    "Data" : "The raw data of the message. This data needs to base64-encoded if you are accessing Amazon SES directly through the HTTPS interface. If you are accessing Amazon SES using an AWS SDK, the SDK takes care of the base 64-encoding for you. In all cases, the client must ensure that the message format complies with Internet email standards regarding email header fields, MIME types, and MIME encoding. \nThe To:, CC:, and BCC: headers in the raw message can contain a group list. \nIf you are using SendRawEmail with sending authorization, you can include X-headers in the raw message to specify the \"Source,\" \"From,\" and \"Return-Path\" addresses. For more information, see the documentation for SendRawEmail.   \nDo not include these X-headers in the DKIM signature, because they are removed by Amazon SES before sending the email.  \nFor more information, go to the Amazon SES Developer Guide."
  },
  "Source" : "The identity's email address. If you do not provide a value for this parameter, you must specify a \"From\" address in the raw text of the message. (You can also specify both.)  \nAmazon SES does not support the SMTPUTF8 extension, as described inRFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.  \nIf you specify the Source parameter and have feedback forwarding enabled, then bounces and complaints will be sent to this email address. This takes precedence over any Return-Path header that you might include in the raw text of the message.",
  "ReturnPathArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter. \nFor example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com. \nInstead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN in the raw message of the email. If you use both the ReturnPathArn parameter and the corresponding X-header, Amazon SES uses the value of the ReturnPathArn parameter.  \nFor information about when to use this parameter, see the description of SendRawEmail in this guide, or see the Amazon SES Developer Guide.",
  "Tags" : [ {
    "MessageTag" : {
      "Value" : "The value of the tag. The value must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. ",
      "Name" : "The name of the tag. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. "
    }
  } ]
}

$body#

Represents a request to send a templated email using Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "TemplateArn" : "The ARN of the template to use when sending this email.",
  "Destination" : {
    "ToAddresses" : [ "string" ],
    "CcAddresses" : [ "string" ],
    "BccAddresses" : [ "string" ]
  },
  "TemplateData" : "A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.",
  "SourceArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter. \nFor example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com. \nFor more information about sending authorization, see the Amazon SES Developer Guide.",
  "ReturnPath" : "The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient's ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. ",
  "ReplyToAddresses" : [ "string" ],
  "ConfigurationSetName" : "The name of the configuration set to use when you send an email using SendTemplatedEmail.",
  "Source" : "The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. \nIf you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.  \nAmazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described inRFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.",
  "ReturnPathArn" : "This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter. \nFor example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com. \nFor more information about sending authorization, see the Amazon SES Developer Guide.",
  "Tags" : [ {
    "MessageTag" : {
      "Value" : "The value of the tag. The value must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. ",
      "Name" : "The name of the tag. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. "
    }
  } ],
  "Template" : "The template to use when sending this email."
}

$body#

Represents a request to set a receipt rule set as the active receipt rule set. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "RuleSetName" : "The name of the receipt rule set to make active. Setting this value to null disables all email receiving."
}

$body#

Represents a request to enable or disable Amazon SES Easy DKIM signing for an identity. For more information about setting up Easy DKIM, see the Amazon SES Developer Guide.

Type: object

{
  "Identity" : "The identity for which DKIM signing should be enabled or disabled.",
  "DkimEnabled" : "Sets whether DKIM signing is enabled for an identity. Set to true to enable DKIM signing for this identity; false to disable it. "
}

$body#

Represents a request to enable or disable whether Amazon SES forwards you bounce and complaint notifications through email. For information about email feedback forwarding, see the Amazon SES Developer Guide.

Type: object

{
  "ForwardingEnabled" : "Sets whether Amazon SES will forward bounce and complaint notifications as email. true specifies that Amazon SES will forward bounce and complaint notifications as email, in addition to any Amazon SNS topic publishing otherwise specified. false specifies that Amazon SES will publish bounce and complaint notifications only through Amazon SNS. This value can only be set to false when Amazon SNS topics are set for both Bounce and Complaint notification types.",
  "Identity" : "The identity for which to set bounce and complaint notification forwarding. Examples: user@example.com, example.com."
}

$body#

Represents a request to set whether Amazon SES includes the original email headers in the Amazon SNS notifications of a specified type. For information about notifications, see the Amazon SES Developer Guide.

Type: object

{
  "NotificationType" : "The notification type for which to enable or disable headers in notifications. ",
  "Enabled" : "Sets whether Amazon SES includes the original email headers in Amazon SNS notifications of the specified notification type. A value of true specifies that Amazon SES will include headers in notifications, and a value of false specifies that Amazon SES will not include headers in notifications. \nThis value can only be set when NotificationType is already set to use a particular Amazon SNS topic.",
  "Identity" : "The identity for which to enable or disable headers in notifications. Examples: user@example.com, example.com."
}

$body#

Represents a request to enable or disable the Amazon SES custom MAIL FROM domain setup for a verified identity. For information about using a custom MAIL FROM domain, see the Amazon SES Developer Guide.

Type: object

{
  "MailFromDomain" : "The custom MAIL FROM domain that you want the verified identity to use. The MAIL FROM domain must 1) be a subdomain of the verified identity, 2) not be used in a \"From\" address if the MAIL FROM domain is the destination of email feedback forwarding (for more information, see the Amazon SES Developer Guide), and 3) not be used to receive emails. A value of null disables the custom MAIL FROM setting for the identity.",
  "BehaviorOnMXFailure" : "The action that you want Amazon SES to take if it cannot successfully read the required MX record when you send an email. If you choose UseDefaultValue, Amazon SES will use amazonses.com (or a subdomain of that) as the MAIL FROM domain. If you choose RejectMessage, Amazon SES will return a MailFromDomainNotVerified error and not send the email. \nThe action specified in BehaviorOnMXFailure is taken when the custom MAIL FROM domain setup is in the Pending, Failed, and TemporaryFailure states.",
  "Identity" : "The verified identity for which you want to enable or disable the specified custom MAIL FROM domain."
}

$body#

Represents a request to specify the Amazon SNS topic to which Amazon SES will publish bounce, complaint, or delivery notifications for emails sent with that identity as the Source. For information about Amazon SES notifications, see the Amazon SES Developer Guide.

Type: object

{
  "NotificationType" : "The type of notifications that will be published to the specified Amazon SNS topic.",
  "SnsTopic" : "The Amazon Resource Name (ARN) of the Amazon SNS topic. If the parameter is omitted from the request or a null value is passed, SnsTopic is cleared and publishing is disabled.",
  "Identity" : "The identity (email address or domain) that you want to set the Amazon SNS topic for.  \nYou can only specify a verified identity for this parameter.  \nYou can specify an identity by using its name or by using its Amazon Resource Name (ARN). The following examples are all valid identities: sender@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com."
}

$body#

Represents a request to set the position of a receipt rule in a receipt rule set. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "After" : "The name of the receipt rule after which to place the specified receipt rule.",
  "RuleSetName" : "The name of the receipt rule set that contains the receipt rule to reposition.",
  "RuleName" : "The name of the receipt rule to reposition."
}

$body#

Type: object

{
  "TemplateData" : "A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.",
  "TemplateName" : "The name of the template that you want to render."
}

$body#

Represents a request to enable or disable the email sending capabilities for your entire Amazon SES account.

Type: object

{
  "Enabled" : "Describes whether email sending is enabled or disabled for your Amazon SES account in the current AWS Region."
}

$body#

Represents a request to update the event destination of a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Type: object

{
  "ConfigurationSetName" : "The name of the configuration set that contains the event destination that you want to update.",
  "EventDestination" : {
    "CloudWatchDestination" : {
      "DimensionConfigurations" : [ {
        "CloudWatchDimensionConfiguration" : {
          "DimensionValueSource" : "The place where Amazon SES finds the value of a dimension to publish to Amazon CloudWatch. If you want Amazon SES to use the message tags that you specify using an X-SES-MESSAGE-TAGS header or a parameter to the SendEmail/SendRawEmail API, choose messageTag. If you want Amazon SES to use your own email headers, choose emailHeader.",
          "DefaultDimensionValue" : "The default value of the dimension that is published to Amazon CloudWatch if you do not provide the value of the dimension when you send an email. The default value must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. ",
          "DimensionName" : "The name of an Amazon CloudWatch dimension associated with an email sending metric. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 256 characters. "
        }
      } ]
    },
    "Enabled" : "Sets whether Amazon SES publishes events to this destination when you send an email with the associated configuration set. Set to true to enable publishing to this destination; set to false to prevent publishing to this destination. The default value is false.",
    "MatchingEventTypes" : [ "string. Possible values: send | reject | bounce | complaint | delivery | open | click | renderingFailure" ],
    "SNSDestination" : {
      "TopicARN" : "The ARN of the Amazon SNS topic that email sending events will be published to. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide."
    },
    "Name" : "The name of the event destination. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Contain less than 64 characters. ",
    "KinesisFirehoseDestination" : {
      "IAMRoleARN" : "The ARN of the IAM role under which Amazon SES publishes email sending events to the Amazon Kinesis Firehose stream.",
      "DeliveryStreamARN" : "The ARN of the Amazon Kinesis Firehose stream that email sending events should be published to."
    }
  }
}

$body#

Represents a request to modify the reputation metric publishing settings for a configuration set.

Type: object

{
  "ConfigurationSetName" : "The name of the configuration set that you want to update.",
  "Enabled" : "Describes whether or not Amazon SES will publish reputation metrics for the configuration set, such as bounce and complaint rates, to Amazon CloudWatch."
}

$body#

Represents a request to enable or disable the email sending capabilities for a specific configuration set.

Type: object

{
  "ConfigurationSetName" : "The name of the configuration set that you want to update.",
  "Enabled" : "Describes whether email sending is enabled or disabled for the configuration set. "
}

$body#

Represents a request to update the tracking options for a configuration set.

Type: object

{
  "TrackingOptions" : {
    "CustomRedirectDomain" : "The custom subdomain that will be used to redirect email recipients to the Amazon SES event tracking domain."
  },
  "ConfigurationSetName" : "The name of the configuration set for which you want to update the custom tracking domain."
}

$body#

Represents a request to update an existing custom verification email template.

Type: object

{
  "FromEmailAddress" : "The email address that the custom verification email is sent from.",
  "TemplateContent" : "The content of the custom verification email. The total size of the email must be less than 10 MB. The message body may contain HTML, with some limitations. For more information, see Custom Verification Email Frequently Asked Questions in the Amazon SES Developer Guide.",
  "SuccessRedirectionURL" : "The URL that the recipient of the verification email is sent to if his or her address is successfully verified.",
  "TemplateName" : "The name of the custom verification email template that you want to update.",
  "FailureRedirectionURL" : "The URL that the recipient of the verification email is sent to if his or her address is not successfully verified.",
  "TemplateSubject" : "The subject line of the custom verification email."
}

$body#

Represents a request to update a receipt rule. You use receipt rules to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Type: object

{
  "Rule" : {
    "ScanEnabled" : "If true, then messages that this receipt rule applies to are scanned for spam and viruses. The default value is false.",
    "Recipients" : [ "string" ],
    "Actions" : [ {
      "ReceiptAction" : {
        "BounceAction" : {
          "SmtpReplyCode" : "The SMTP reply code, as defined by RFC 5321.",
          "Sender" : "The email address of the sender of the bounced email. This is the address from which the bounce message will be sent.",
          "TopicArn" : "The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the bounce action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.",
          "Message" : "Human-readable text to include in the bounce message.",
          "StatusCode" : "The SMTP enhanced status code, as defined by RFC 3463."
        },
        "S3Action" : {
          "BucketName" : "The name of the Amazon S3 bucket that incoming email will be saved to.",
          "TopicArn" : "The ARN of the Amazon SNS topic to notify when the message is saved to the Amazon S3 bucket. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.",
          "KmsKeyArn" : "The customer master key that Amazon SES should use to encrypt your emails before saving them to the Amazon S3 bucket. You can use the default master key or a custom master key you created in AWS KMS as follows:  \n To use the default master key, provide an ARN in the form of arn:aws:kms:REGION:ACCOUNT-ID-WITHOUT-HYPHENS:alias/aws/ses. For example, if your AWS account ID is 123456789012 and you want to use the default master key in the US West (Oregon) region, the ARN of the default master key would be arn:aws:kms:us-west-2:123456789012:alias/aws/ses. If you use the default master key, you don't need to perform any extra steps to give Amazon SES permission to use the key.  \n To use a custom master key you created in AWS KMS, provide the ARN of the master key and ensure that you add a statement to your key's policy to give Amazon SES permission to use it. For more information about giving permissions, see the Amazon SES Developer Guide.   \nFor more information about key policies, see the AWS KMS Developer Guide. If you do not specify a master key, Amazon SES will not encrypt your emails.  \nYour mail is encrypted by Amazon SES using the Amazon S3 encryption client before the mail is submitted to Amazon S3 for storage. It is not encrypted using Amazon S3 server-side encryption. This means that you must use the Amazon S3 encryption client to decrypt the email after retrieving it from Amazon S3, as the service has no access to use your AWS KMS keys for decryption. This encryption client is currently available with the AWS SDK for Java and AWS SDK for Ruby only. For more information about client-side encryption using AWS KMS master keys, see the Amazon S3 Developer Guide.",
          "ObjectKeyPrefix" : "The key prefix of the Amazon S3 bucket. The key prefix is similar to a directory name that enables you to store similar data under the same directory in a bucket."
        },
        "StopAction" : {
          "Scope" : "The name of the RuleSet that is being stopped.",
          "TopicArn" : "The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the stop action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide."
        },
        "WorkmailAction" : {
          "TopicArn" : "The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the WorkMail action is called. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.",
          "OrganizationArn" : "The ARN of the Amazon WorkMail organization. An example of an Amazon WorkMail organization ARN is arn:aws:workmail:us-west-2:123456789012:organization/m-68755160c4cb4e29a2b2f8fb58f359d7. For information about Amazon WorkMail organizations, see the Amazon WorkMail Administrator Guide."
        },
        "SNSAction" : {
          "TopicArn" : "The Amazon Resource Name (ARN) of the Amazon SNS topic to notify. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.",
          "Encoding" : "The encoding to use for the email within the Amazon SNS notification. UTF-8 is easier to use, but may not preserve all special characters when a message was encoded with a different encoding format. Base64 preserves all special characters. The default value is UTF-8."
        },
        "AddHeaderAction" : {
          "HeaderValue" : "Must be less than 2048 characters, and must not contain newline characters (\"\\r\" or \"\\n\").",
          "HeaderName" : "The name of the header to add. Must be between 1 and 50 characters, inclusive, and consist of alphanumeric (a-z, A-Z, 0-9) characters and dashes only."
        },
        "LambdaAction" : {
          "FunctionArn" : "The Amazon Resource Name (ARN) of the AWS Lambda function. An example of an AWS Lambda function ARN is arn:aws:lambda:us-west-2:account-id:function:MyFunction. For more information about AWS Lambda, see the AWS Lambda Developer Guide.",
          "TopicArn" : "The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the Lambda action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.",
          "InvocationType" : "The invocation type of the AWS Lambda function. An invocation type of RequestResponse means that the execution of the function will immediately result in a response, and a value of Event means that the function will be invoked asynchronously. The default value is Event. For information about AWS Lambda invocation types, see the AWS Lambda Developer Guide.  \nThere is a 30-second timeout on RequestResponse invocations. You should use Event invocation in most cases. Use RequestResponse only when you want to make a mail flow decision, such as whether to stop the receipt rule or the receipt rule set."
        }
      }
    } ],
    "Enabled" : "If true, the receipt rule is active. The default value is false.",
    "Name" : "The name of the receipt rule. The name must:  \n This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).  \n Start and end with a letter or number.  \n Contain less than 64 characters. ",
    "TlsPolicy" : "Specifies whether Amazon SES should require that incoming email is delivered over a connection encrypted with Transport Layer Security (TLS). If this parameter is set to Require, Amazon SES will bounce emails that are not received over TLS. The default is Optional."
  },
  "RuleSetName" : "The name of the receipt rule set that the receipt rule belongs to."
}

$body#

Type: object

{
  "Template" : {
    "HtmlPart" : "The HTML body of the email.",
    "TextPart" : "The email body that will be visible to recipients whose email clients do not display HTML.",
    "TemplateName" : "The name of the template. You will refer to this name when you send email using the SendTemplatedEmail or SendBulkTemplatedEmail operations.",
    "SubjectPart" : "The subject line of the email."
  }
}

$body#

Represents a request to generate the CNAME records needed to set up Easy DKIM with Amazon SES. For more information about setting up Easy DKIM, see the Amazon SES Developer Guide.

Type: object

{
  "Domain" : "The name of the domain to be verified for Easy DKIM signing."
}

$body#

Represents a request to begin Amazon SES domain verification and to generate the TXT records that you must publish to the DNS server of your domain to complete the verification. For information about domain verification, see the Amazon SES Developer Guide.

Type: object

{
  "Domain" : "The domain to be verified."
}

$body#

Represents a request to begin email address verification with Amazon SES. For information about email address verification, see the Amazon SES Developer Guide.

Type: object

{
  "EmailAddress" : "The email address to be verified."
}

$body#

Represents a request to begin email address verification with Amazon SES. For information about email address verification, see the Amazon SES Developer Guide.

Type: object

{
  "EmailAddress" : "The email address to be verified."
}